You don’t have to just take our word for it. See the evidence of our quality work for yourself in these case studies of projects we’ve completed.
We’ve Put in the Time to Become an Industry Leader
CNC Foundations has been in operation for over 33 years. In that time, we have completed countless projects and contributed to the success of an abundance of clients. We keep track of our work with case studies like these because we take pride in the work we perform and the operations we offer. These case studies span our entire service area and all of the capabilities we offer at CNC Foundations.
See something here you want us to perform for your project? Reach out today to learn more about how we can meet your requirements and exceed your expectations.
We’ve worked tirelessly to be your first choice in ground improvement and the industry leader in customer support. Increase your success and raise the quality of your project with CNC Foundations. We offer in-house services in:
Project Management
Engineering & Load Testing
Preliminary Geotechnical Design
Design/Build Construction
Use these case studies as proof of our continued efforts and the impact our expertise can have on your project. In every case study, we include a project overview, the requirements and challenges we faced, along with the solution and results we provided for the project. Take this opportunity to discover more about our capabilities and the quality of work we can deliver.
Omaha, NE | Aggregate Piers / VSCs
A large agricultural chemical formulating and packing facility was adding two new additions between two existing plant facilities.
Iowa | Aggregate Piers / VSCs
Three tanks were constructed in an agricultural area for a new Fertilizer Plant. Approximately 6,000 Aggregate Piers / VSCs were installed.
Eastern Iowa | Micropiles
Micropiles work well for facilities that need deep foundations, foundation repairs, or adjacent structure foundation stabilization. The client’s facility needed repairs, so our micropile retrofitting services fit their needs.
St. Louis, MO | Aggregate Piers / VSCs
CNC Foundations completed a project in St. Louis as an addition to Ballpark Village, an entertainment district adjacent to Busch Stadium.
Chicago Area | Aggregate Piers & VCCs
We installed pre-drilled vibratory stone columns and vibratory concrete columns for a fitness center in the Chicago suburb of Oak Brook, IL.
Chicago, IL | Aggregate Piers / VSCs
CNC Foundations went from the first call to installation in just 3 weeks. We expedited the process for this emergency installation and delivered results.
Orland Park, IL | Aggregate Piers / VSCs
A 5 story mixed-use building (parking garage and restaurant) constructed in Orland Park. It will be used for parking and a restaurant.
East Peoria, IL | Aggregate Piers / VSCs
A 143,000 square foot retail warehouse for a wholesale store was proposed at a large retail center. We installed over 1,700 stone columns.
Cincinnati, OH/Vibratory Stone Columns (VSC)
A multifamily apartment complex in Cincinnati was beginning construction, but the ground on its site had sinkhole conditions.
Washington, D.C./Vibratory Stone Columns (VSC)
A commercial mixed-use building in downtown Washington, D.C., needed vibratory stone columns to stabilize its foundation.
Jessup, Maryland/Vibratory Stone Columns (VSC)
A commercial office and technology park in Jessup, MD, needed vibratory stone columns to stabilize its foundation.
Cullowhee, NC | Aggregate Piers / VSCs & Uplift Anchors
Western Carolina University is one of the many universities that we have been fortunate to do ground improvement for throughout the U.S.
Columbus, OH | Vibratory Stone & Concrete Columns
Three new buildings required a 7000 psf bearing pressure. CNC Foundations was selected to install an Aggregate Pier/VSC Ground Improvement.
Rolling Hills High School | Vibratory Stone Columns | Byesville, OH
CNC Foundations determined that vibratory stone columns (VSCs) represented the most efficient solution for enhancing Rolling Hills High School’s soil conditions to support the new building.
Government & Military Ground Improvement Solutions
We recently installed vibro stone columns/aggregate piers (VSCs) to support a civic building’s foundation in Central Indiana. Learn about this project here.
Oakley, CA | Aggregate Piers / VSCs & Liquefaction Mitigation
The location for the new logistics center in Oakley, CA was in an area prone to seismic hazards. We installed VSCs to help reduce the risk of liquefaction.
Learn how CNC Foundations’ turnkey solution allowed a water treatment plant to be up and running less than one month after suffering damaging cracks in a levee floor.
South Texas | Aggregate Piers / VSCs
A wind farm is a unique project that requires expertise in controlling settlement and a load testing process for the stability of the wind turbines.
We installed vibratory stone columns for a multi-family building site in St. Paul, Minnesota. We used vibratory stone columns and slab support techniques.
Preventing differential settlement is critical for new construction projects. See how CNC Foundations helped a client strength the soil for a multi-family building in Richmond, Virginia.
This healthcare case study showcases our ability to adjust to changing client timelines and processes to deliver the ground improvement services they need.
In 2011, the entire town of Joplin, Missouri, was left devastated as an EF5 tornado destroyed their town, including their elementary school. CNC Foundations provided a Deep Foundations solution for the new school.
The design requirements for this deep foundation were 200 kips compression, 125 kips tension, and 25 kips shear. The soil borings revealed limestone at an approximate elevation of 135 feet. Above that was a mixture of gravelly sands, sands, sandy silts, and fill extending to the surface. The job site location was near the Missouri River.
Government Scott Air Force Base, IL | Hollow Bar Micropiles
The project consisted of upgrading the existing building at an Air Force Base. The upgraded building will be an advanced communication center that will include black box encrypted services and other best of the best communication technologies.
The existing building was constructed in 1936 and replaced the previous school building that had opened in 1883. The present 3-story building was constructed using a concrete frame with concrete block and brick masonry.
Government Bowling Green, KY | Micropiles & Rock Anchors
The city of Bowling Green, Kentucky, acquired Federal Stimulus money to construct a new, multi-million dollar Wastewater Treatment Facility to replace the outdated facility.
Commercial, Retail, Office Indianapolis, IN | Micropiles
Downtown Indianapolis is famous for the Circle. A new building was to be constructed within the Circle, next to an existing historic building from the 1890s. Access to the site was limited through an alley off the main street into the Circle.
Haley brings a diverse and impressive skill set to CNC Foundations, with a strong background in education. Throughout her career in education, Haley developed valuable abilities in goal setting, team building, and relationship management—skills that are essential for her transition into the ground improvement industry. Haley thrives on tackling industry challenges alongside her clients, to ensure a positive customer experience.
In her free time, Haley enjoys being outdoors with her husband and three boys. They love exploring different activities like boating on the lake, having family barbecues, and attending sporting events.
Kyle Tansy
Kyle joined CNC Foundations with a lifetime of experience in both residential and commercial construction. He brings a wealth of knowledge gained from working at one of the region’s largest general contractors, as well as expertise in sales and account management.
As an innovative sales leader, Kyle has a proven track record in complex problem-solving, business development, and long-range planning. He excels in creating value within his territory by building strong relationships and implementing strategic solutions.
Kyle resides in Ohio with his wife, Michelle, and their two children. In his free time, he enjoys watching college football, golfing, hunting, hiking, and all things watersports.
Cari Edgin
Cari Ellen grew up immersed in the construction and business world, with her family owning a directional boring company. Prior to joining CNC Foundations, she built a thriving real estate team, excelling in both residential and commercial real estate sectors. Beyond her professional endeavors, Cari Ellen enjoys an active lifestyle—working out, coaching basketball, golfing, fishing with her children, hiking, traveling, and embracing all things outdoors.
As a mother of three, Cari Ellen’s life revolves around her kids, cheering them on in their various sports and activities. Originally from South Carolina, she now calls the DC/Baltimore Metro area home, having lived all along the East Coast over the last twelve years. Cari Ellen is excited to further her career as a woman in construction with CNC Foundations, continuing to break barriers and make an impact in the industry.
Michael Lee
Michael brings a wealth of experience in sales, account management, and residential construction to CNC Foundations. With a focus on nurturing long-term client relationships, he values transparent communication and honesty in achieving construction goals. Combining Michael’s skills with his work ethic, it will help with his transition into Ground Improvement.
Michael currently resides in the St. Louis area. Outside of work he enjoys playing sports and spending time with family.
Mitch Oakes
Mitch came to CNC Foundations in 2024 after ten years in the medical device industry. Mitch’s focus on developing strong customer relationships made it an easy transition into the ground improvement industry.
Mitch is born and raised in MN and in his spare time he loves playing golf, hunting, and boating at the cabin. Mitch and his wife Calley have two boys, Will and Matt and a large Bernese Mountain Dog named Doug. As a family they love to spend time traveling and enjoying as much time outside as possible.
Tyler Prazma
CNC Foundations’ Business Development Manager for Alabama, Georgia, and South Carolina is Tyler Prazma.
Tyler brings six years of experience as a college wrestling coach, and two years working in the private sector. During this time, Tyler developed his ability to foster strong relationships and team cohesion, while performing at a demanding level.
Prior to this, Tyler graduated from the University of Missouri where he competed in Wrestling for the Tigers.
Tyler enjoys spending time with his family, and outdoor activities like golf, fishing, and hunting. Tyler lives with his wife Bailey whom he has been married to since 2017.
Dan Travers
Dan began his career with CNC Foundations in January 2007. He started as the company Fleet Manager and then joined the Civil Construction Division as a Project Estimator in March 2017. After eight months, he was promoted to Project Manager and after a few years in this role he earned the title of Senior Project Manager. During his time as a PM, he managed hundreds of ground improvement and deep foundation projects working on jobs across the country with some of the largest general contractors in the United States. On these projects he had responsibility for the project budget, schedule, materials procurement, cost estimating, client communication, contract negotiations and closeout procedures. In January 2024, Dan was promoted to Director of Pre-Construction where he is tasked with utilizing his experience to assist a team of Project Estimators with finding the best possible solution to ground improvement and deep foundation opportunities with our valued customers and clients.
Dan was born in Yuma, AZ, but has called St Louis, MO his home for many years where he currently lives with his wife Angie and three daughters Ella, Nora, and Clara. Outside of work he enjoys spending time at his kid’s sporting events, coaching their teams and volunteering his time at St. Francis of Assisi School and Parish. He is a diehard St Louis Blues/CITY/Cardinals fan and loves spending time outdoors playing sports, camping and fishing.
Dan Travers
Dan began his career with CNC Foundations in January 2007. He started as the company Fleet Manager and then joined the Civil Construction Division as a Project Estimator in March 2017. After eight months, he was promoted to Project Manager and after a few years in this role he earned the title of Senior Project Manager. During his time as a PM, he managed hundreds of ground improvement and deep foundation projects working on jobs across the country with some of the largest general contractors in the United States. On these projects he had responsibility for the project budget, schedule, materials procurement, cost estimating, client communication, contract negotiations and closeout procedures. In January 2024, Dan was promoted to Director of Pre-Construction where he is tasked with utilizing his experience to assist a team of Project Estimators with finding the best possible solution to ground improvement and deep foundation opportunities with our valued customers and clients.
Dan was born in Yuma, AZ, but has called St Louis, MO his home for many years where he currently lives with his wife Angie and three daughters Ella, Nora, and Clara. Outside of work he enjoys spending time at his kid’s sporting events, coaching their teams and volunteering his time at St. Francis of Assisi School and Parish. He is a diehard St Louis Blues/CITY/Cardinals fan and loves spending time outdoors playing sports, camping and fishing.
Erik Prather
Erik joined CNC Foundations in 2023 with over 10 years of experience in industrial equipment and construction supply sales.
Using his experience throughout Chicagoland and Wisconsin, Erik partners with companies to provide unique solutions to ground improvement. Collaborating with clients on a wide range of projects, he builds lasting relationships that extend after the project ends.
Residing in Chicago, Erik enjoys being active outdoors all around the city regardless of the season. Also, an avid traveler, he enjoys exploring new places and experiencing new cultures.
Jason Sherrer
Jason comes to CNC Foundations from a successful thirteen-year career in coaching college baseball. From his professional experiences Jason brings a unique a skill set with him including team and personal goal achievement, relationship building with clients, and organizational capabilities. Combining Jason’s work ethic and skill set will assist him in his transition to the ground improvement industry.
Jason resides in North Carolina with his wife, son, and daughter. They enjoy all activities the outdoors has to offer with a passion for hunting, fishing, and boating.”
Project Estimator
CNC Foundations, Inc is a family-owned and oriented company that has specialized in deep foundation services since 1987. We are rapidly growing and looking to add more to our team! Currently we are in need of a Project Estimator.
A Project Estimator will be responsible for the construction as well as financial aspects of multiple projects. Responsibilities will include qualifying projects for bid, estimating, budgeting, securing contracts and supervising personnel on the project. This will include maintaining the highest quality of product standards, supervising financial aspects of the project while administering quality construction safety practices in order to successfully compete projects on schedule and within budget.
Primary Responsibilities:
• Estimate projects from bid drawings, specs and contract documents. Read blueprints to perform take offs from the drawings and work with company estimating software to originate bid price.
• Prepare and submit budget estimates and cost tracking reports.
• Qualify projects for possible bid opportunities.
• Prepare contracts and negotiate revisions, changes and additions to contractual agreements.
• Other miscellaneous tasks as needed.
Compensation:
Commensurate with experience
Job Type:
Full-time
Benefits:
• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Vision insurance
Schedule:
• Day shift
• Monday to Friday
Supplemental pay types:
• Commission pay
Ability to commute/relocate:
• Caseyville, IL: Reliably commute or planning to relocate before starting work (Required)
Experience:
• Construction estimating: 1 year (Required)
Jason Courtney
Jason began his career at the very beginning of CNC Foundations in 1987. He began working as a laborer for the company at the age of 15. Jason worked his way up through multiple positions, including Foreman, Superintendent, and Operations Manager. Over several years, Jason began the Civil Construction Division from the ground up and became the company Vice President. Jason now serves as the company President of CNC Foundations, succeeding his father who started the companies.
Jason was born and raised in Southern Illinois. He is an avid outdoorsman and enjoys spending time with his wife of over 20 years and two children.
He is a member of First Baptist Church and chairs multiple fundraising events for small private schools and orphanages in different countries. Jason is a continuous supporter of numerous other charities local and international charities.
Ryan Cox
Prior to joining the CNC Foundations team, Ryan was a general contractor and custom home builder for over 14 years. In addition, he also spent 5 years in the mortgage industry as a senior renovation specialist. Ryan brings a wealth of knowledge and understanding in helping people achieve their construction goals and believes communication and honesty are the keys to building successful relationships with his clients. Ryan enjoys spending time with his wife of 26 years and their two sons traveling, hiking, trout fishing, golfing, and watching college sports.
Jason Courtney
Jason began his career at the very beginning of CNC Foundations in 1987. He began working as a laborer for the company at the age of 15. Jason worked his way up through multiple positions, including Foreman, Superintendent, and Operations Manager. Over several years, Jason began the Civil Construction Division from the ground up and became the company Vice President. Jason now serves as the company President of CNC Foundations, succeeding his father who started the companies.
Jason was born and raised in Southern Illinois. He is an avid outdoorsman and enjoys spending time with his wife of over 20 years and two children.
He is a member of First Baptist Church and chairs multiple fundraising events for small private schools and orphanages in different countries. Jason is a continuous supporter of numerous other charities local and international charities.
Turn on screen reader support
To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash
